https://emsglob.com/blog/Practical guides from EMSGLOB on choosing test probes, pogo pins, connectors and test interface products.en https://emsglob.com/blog/replace-worn-test-probes-ict-fct-fixture/https://emsglob.com/blog/replace-worn-test-probes-ict-fct-fixture/Sun, 01 Nov 2026 10:15:00 +0530Signs a probe is worn, a six-step swap that leaves the wiring alone, how to pick the replacement, the toolkit and five maintenance habits. https://emsglob.com/blog/kelvin-4-wire-test-probes-four-wire-measurement/https://emsglob.com/blog/kelvin-4-wire-test-probes-four-wire-measurement/Sat, 31 Oct 2026 07:15:00 +0530Why 2-wire tests misread low resistance, how force and sense pairs fix it, when a fixture needs Kelvin probes, and five fixture tips. https://emsglob.com/blog/pogo-pins-vs-test-probes-ict-fct-fixtures/https://emsglob.com/blog/pogo-pins-vs-test-probes-ict-fct-fixtures/Wed, 28 Oct 2026 08:45:00 +0530Both are spring-loaded, both get called pogo pins. Where each one lives, what it touches, a four-question check, and what to send for a quote. https://emsglob.com/blog/how-to-choose-ict-fct-spring-test-probes/https://emsglob.com/blog/how-to-choose-ict-fct-spring-test-probes/Mon, 26 Oct 2026 09:00:00 +0530Pitch, tip, spring force, travel, current and receptacle: six checks that decide whether your test fixture makes clean contact on every cycle.