EMSGLOB Blog
Guides for test probes, pogo pins and connectors
Practical guides from EMSGLOB on choosing test probes, pogo pins, connectors and test interface products.
How to Replace Worn Test Probes in an ICT/FCT Fixture (Without Rewiring It)
Signs a probe is worn, a six-step swap that leaves the wiring alone, how to pick the replacement, the toolkit and five maintenance habits.
Read the how-to →
Kelvin (4-Wire) Test Probes: How Four-Wire Measurement Works and When Your Fixture Needs It
Why 2-wire tests misread low resistance, how force and sense pairs fix it, when a fixture needs Kelvin probes, and five fixture tips.
Read the explainer →
Pogo Pins vs Test Probes: Which One Does Your ICT/FCT Fixture Need?
Both are spring-loaded, both get called pogo pins. Where each one lives, what it touches, a four-question check, and what to send for a quote.
Read the explainer →
How to Choose ICT/FCT Spring Test Probes: Tip Style, Spring Force and Pitch
Pitch, tip, spring force, travel, current and receptacle: six checks that decide whether your test fixture makes clean contact on every cycle.
Read the guide →Talk to us about your test fixture
Rahul Desai · sales@emsglob.com · +91 7383235369