Industry
Test Probes & POGO Pins for PCB & Electronics Testing
In-Circuit (ICT) & Functional Test (FCT) Probes for Consumer & Industrial Electronics
From aerospace avionics to medical IoT wearables, electronics contract manufacturers trust EMSGLOB spring probes for reliable bed-of-nails PCB testing.
Applications
- In-Circuit Test (ICT) Bed-of-Nails Fixtures
- Functional Circuit Test (FCT) Board Lockers
- Aerospace Flight Controller Cable Continuity Rigs
- Medical Device Wearable Battery Interface Pins
The challenge
High-density SMT target pads with flux residue causing poor electrical contact on standard probe tips.
EMSGLOB approach
Self-cleaning serrated and tri-needle plunger tips designed to bite through flux residue with low mechanical stress.
Recommended products
ICT/FCT Spring Test Probes
Spring-loaded test probes form the contact between an in-circuit (ICT) or functional (FCT) tester and the board under test.
149 series · 3372 part numbers
Fine Pitch Test Probes
Fine pitch probes are slim spring contacts for densely populated boards and components, where test points sit very close together.
32 series · 224 part numbers
Probe Receptacles
Receptacles are the sockets that hold test probes in a fixture.
44 series · 96 part numbers
Switch Probes
Switch probes contain an internal switching contact that changes state when the plunger is pressed.
45 series · 367 part numbersFrequently asked questions
Which EMSGLOB probes are used for pcb & electronics testing?
For electronics & pcb manufacturing EMSGLOB lists: ICT/FCT Spring Test Probes, Fine Pitch Test Probes, Probe Receptacles, Switch Probes.
What are typical pcb & electronics testing applications?
In-Circuit Test (ICT) Bed-of-Nails Fixtures; Functional Circuit Test (FCT) Board Lockers; Aerospace Flight Controller Cable Continuity Rigs; Medical Device Wearable Battery Interface Pins.
What is the main contact challenge in pcb & electronics testing?
High-density SMT target pads with flux residue causing poor electrical contact on standard probe tips.
How does EMSGLOB address it?
Self-cleaning serrated and tri-needle plunger tips designed to bite through flux residue with low mechanical stress.
How do I request a quote or a custom probe?
Send your requirements through the RFQ form on the contact page, email sales@emsglob.com or call +91-7383235369. Drawings in STEP, IGES, PDF, DWG, DXF or ZIP format can be attached.
Need a quote or a custom probe?
Send your drawing, pitch, current and travel requirements to the engineering team. The RFQ form accepts STEP, IGES, PDF, DWG, DXF and ZIP files.