Product category
Fine Pitch Test Probes
Fine pitch probes are slim spring contacts for densely populated boards and components, where test points sit very close together. They let a fixture reach small centre-to-centre spacings while keeping contact force and travel under control.
The EMSGLOB range below lists 32 series with 224 part numbers. Open a series to see its full specification table, drawings and every part number, then send us the parts you need for a quotation.
Range at a glance
| Series / families | 32 |
|---|---|
| Catalogue part numbers | 224 |
| Pitch range | 0.35 – 1.27 mm |
| Total length range | 3 – 35.9 mm |
| Rated current range | 0.2 – 7.5 A |
Applications
- Densely populated, highly integrated PCBs
- Component and module testing at small centre distances
- Semiconductor and package-level test interfaces
- Fixtures where standard 50 mil or 100 mil probes do not fit
All fine pitch probes series
Series
KRS-035-001CA
Fine pitch probe
Pitch 0.35 mm · 4 A
KRS-040-002CA
Fine pitch probe
Pitch 0.4 mm · 6 A
KRS-050-003CA
Fine pitch probe
Pitch 0.5 mm · 7.5 A
Series 106
Fine pitch probe
Pitch 1 mm · 1 A
Series 107
Fine pitch probe
Pitch 1 mm · 1 A · 3 parts
Series 108
Fine pitch probe
Pitch 1 mm · 1 A · 6 parts
Series 700
Fine pitch probe
Pitch 1.27 mm · 1 A · 9 parts
Series 701
Fine pitch probe
Pitch 0.5 mm · 0.2 A · 6 parts
Series 702
Fine pitch probe
Pitch 0.7 mm · 1 A · 11 parts
Series 703
Fine pitch probe
Pitch 0.8 mm · 1 A · 9 parts
Series 704
Fine pitch probe
Pitch 0.8 mm · 1 A · 4 parts
Series 705
Fine pitch probe
Pitch 1 mm · 1 A · 15 parts
Series 706
Fine pitch probe
Pitch 1 mm · 1 A · 14 parts
Series 707
Fine pitch probe
Pitch 1.27 mm · 1 A · 15 parts
Series 708
Fine pitch probe
Pitch 1.27 mm · 1 A · 8 parts
Series 820
Fine pitch probe
Pitch 0.5 mm · 0.5 A · 3 parts
Series 825
Fine pitch probe
Pitch 0.7 mm · 0.5 A · 3 parts
Series 831
Fine pitch probe
Pitch 0.7 mm · 0.6 A · 5 parts
Series 835
Fine pitch probe
Pitch 0.7 mm · 0.6 A · 3 parts
Series 838
Fine pitch probe
Pitch 0.8 mm · 0.6 A · 6 parts
Series 840
Fine pitch probe
Pitch 0.8 mm · 0.6 A · 5 parts
Series 848
Fine pitch probe
Pitch 1 mm · 0.8 A · 4 parts
Series 858
Fine pitch probe
Pitch 1 mm · 1 A · 4 parts
Series 872
Fine pitch probe
Pitch 1.27 mm · 1 A · 4 parts
FP-DF
Fine pitch probe
0.25 – 5 A · L 3.26 – 5.84 mm · 6 parts300µm - 500µm
FP-S
Fine pitch probe
1 – 2 A · L 15.8 – 23.9 mm · 7 parts
H380
Fine pitch probe
Pitch 0.50 mm · L 9.95 mm
H480
Fine pitch probe
Pitch 0.90 mm · L 16 mm · 2 parts> 500 µm
FAQ
What fine pitch probes does EMSGLOB supply?
The fine pitch test probes range has 32 series with 224 catalogue part numbers, covering pitches of 0.35 – 1.27 mm. Each series has its own page with the full specification table and part number list.
What are fine pitch probes used for?
Typical uses: densely populated, highly integrated PCBs; component and module testing at small centre distances; semiconductor and package-level test interfaces; fixtures where standard 50 mil or 100 mil probes do not fit.
How do I choose the right fine pitch probe?
Start from the pitch and the space available in your fixture, then check travel, spring force and the current the contact must carry, and pick a tip style that suits the test point. The series pages list these values for every part number; the EMSGLOB team can help you shortlist parts.
Can I get a quotation or samples?
Yes. Send the part numbers and quantities to sales@emsglob.com, call +91-7383235369 or use the enquiry form on the contact page.
Other product categories
- ICT/FCT Spring Test Probes
- High-Current Contact Probes
- Kelvin (4-Wire) Test Probes
- Battery & Charging Contacts
- Pogo Pin Connectors
- RF (Radio Frequency) Test Probes
- Switch Probes
- Step Probes
- Flying Probes
- Rigid Contact Pins
- Probe Receptacles
- Test Interface & Fixture Solutions
- Tools, Cleaning & Accessories
- Fixture Cylinders & Locking Devices
- Temperature Sensor Probes
Enquire / Request a quote
Tell us the fine pitch probes you need, the quantity and your pitch, travel and current requirements, and the EMSGLOB team will reply with availability and a quotation. Drawings in STEP, IGES, PDF, DWG, DXF or ZIP are welcome.