Product category
RF (Radio Frequency) Test Probes
RF test probes contact high-frequency signal paths, such as coaxial connectors and RF test points, through a controlled-impedance design. They allow radio and high-frequency modules to be tested inside a fixture.
The EMSGLOB range below lists 15 series with 162 part numbers. Open a series to see its full specification table, drawings and every part number, then send us the parts you need for a quotation.
Range at a glance
| Series / families | 15 |
|---|---|
| Catalogue part numbers | 162 |
| Pitch range | 2.54 – 12 mm |
| Total length range | 10 – 59.5 mm |
| Rated current range | 0.5 – 20 A |
Applications
- Automotive RF modules and connectors
- Consumer electronics with radio interfaces
- Industrial RF and high-frequency assemblies
- Contacting coaxial connectors in test fixtures
All RF test probes series
Series
Automotive
Automotive
RF test probe
10 A · L 10 – 43.4 mm · 2 parts
H860
RF test probe
10 A · L 22 mm · 3 parts
HF76
RF test probe
L 31.2 – 35.45 mm · 5 parts
HF77
RF test probe
0.5 – 1 A · L 30.2 – 38.05 mm · 46 parts
HF819
RF test probe
Pitch 12.0 mm · 10 A · 11 parts
HF829
RF test probe
Pitch 8.9 mm · 5 A
TC77
RF test probe
1.5 A · L 36.5 mm · 2 partsConsumer
HF05
RF test probe
Pitch 5.00 mm · 0.5 A · 2 parts
HF66
RF test probe
0.5 – 10 A · L 26.1 – 45.6 mm · 17 parts
TC-P
RF test probe
1.5 A · L 59.5 mmIndustrial
FAQ
What RF test probes does EMSGLOB supply?
The rf (radio frequency) test probes range has 15 series with 162 catalogue part numbers, covering pitches of 2.54 – 12 mm. Each series has its own page with the full specification table and part number list.
What are RF test probes used for?
Typical uses: automotive RF modules and connectors; consumer electronics with radio interfaces; industrial RF and high-frequency assemblies; contacting coaxial connectors in test fixtures.
How do I choose the right RF test probe?
Start from the pitch and the space available in your fixture, then check travel, spring force and the current the contact must carry, and pick a tip style that suits the test point. The series pages list these values for every part number; the EMSGLOB team can help you shortlist parts.
Can I get a quotation or samples?
Yes. Send the part numbers and quantities to sales@emsglob.com, call +91-7383235369 or use the enquiry form on the contact page.
Other product categories
- ICT/FCT Spring Test Probes
- Fine Pitch Test Probes
- High-Current Contact Probes
- Kelvin (4-Wire) Test Probes
- Battery & Charging Contacts
- Pogo Pin Connectors
- Switch Probes
- Step Probes
- Flying Probes
- Rigid Contact Pins
- Probe Receptacles
- Test Interface & Fixture Solutions
- Tools, Cleaning & Accessories
- Fixture Cylinders & Locking Devices
- Temperature Sensor Probes
Enquire / Request a quote
Tell us the RF test probes you need, the quantity and your pitch, travel and current requirements, and the EMSGLOB team will reply with availability and a quotation. Drawings in STEP, IGES, PDF, DWG, DXF or ZIP are welcome.