Product category
Probe Receptacles
Receptacles are the sockets that hold test probes in a fixture. The probe plugs into the receptacle, so a worn probe can be swapped in seconds without desoldering the fixture wiring. Receptacles come with crimp, solder, wire-wrap and pre-wired terminations.
The EMSGLOB range below lists 44 series with 96 part numbers. Open a series to see its full specification table, drawings and every part number, then send us the parts you need for a quotation.
Range at a glance
| Series / families | 44 |
|---|---|
| Catalogue part numbers | 96 |
| Pitch range | 0.5 – 6.5 mm |
| Total length range | 27 – 43 mm |
Applications
- Holding replaceable test probes in ICT/FCT fixtures
- Quick probe exchange without desoldering
- Crimp, solder or wire-wrap wiring of fixtures
All receptacles series
S 07
Receptacle
Pitch 1.27 mm · 4 parts
S 15
Receptacle
Pitch 1.27 mm · 5 parts
S 18
Receptacle
Pitch 1.9 mm · 3 parts
S 21
Receptacle
Pitch 2.54 mm · 3 parts
S 26
Receptacle
Pitch 2.54 mm · 3 parts
S 27
Receptacle
Pitch 4 mm · 3 parts
S 28
Receptacle
Pitch 4.8 mm · 4 parts
S 29
Receptacle
Pitch 2.54 mm · 5 parts
S 30
Receptacle
Pitch 2.54 mm · 3 parts
S 50
Receptacle
Pitch 3.8 mm · 3 parts
S 51
Receptacle
Pitch 3.8 mm
S 60
Receptacle
Pitch 4.5 mm
S 66
Receptacle
Pitch 1.65 mm
S 70
Receptacle
Pitch 2.54 mm
S 71
Receptacle
Pitch 2.54 mm · 2 parts
S 72
Receptacle
Pitch 5 mm
S 75
Receptacle
Pitch 1.9 mm · 3 parts
S 100
Receptacle
Pitch 2.54 mm · 4 parts
S 106
Receptacle
Pitch 1 mm · L 27.0 mm
S 108
Receptacle
Pitch 1 mm · 2 parts
S 141
Receptacle
Pitch 1.27 mm · 2 parts
S 150
Receptacle
Pitch 3.8 mm · 2 parts
S 172
Receptacle
Pitch 4 mm
S 211
Receptacle
Pitch 2.54 mm · 2 parts
S 265
Receptacle
Pitch 3.5 mm · 2 parts
S 353
Receptacle
Pitch 6.5 mm · L 43 mm
S 365
Receptacle
Pitch 6.5 mm
S 509
Receptacle
Pitch 6.2 mm
S 700
Receptacle
Pitch 1.27 mm · 3 parts
S 701
Receptacle
Pitch 0.7 mm · 2 parts
S 703
Receptacle
Pitch 0.8 mm · 3 parts
S 704
Receptacle
Pitch 0.8 mm · 2 parts
S 705
Receptacle
Pitch 1 mm · 2 parts
S 706
Receptacle
Pitch 1 mm · 2 parts
S 825
Receptacle
Pitch 0.5 mm · 3 parts
S 827
Receptacle
Pitch 2.54 mm
S 835
Receptacle
Pitch 0.5 mm · 2 parts
S 838
Receptacle
Pitch 0.7 mm · 2 parts
S 840
Receptacle
Pitch 0.8 mm
S 848
Receptacle
Pitch 1 mm · 4 parts
S 872
Receptacle
Pitch 1.27 mm
S 967
Receptacle
Pitch 3 mm
S 2100
Receptacle
Pitch 5 mm
S FK-831
Receptacle
Pitch 4 mmFAQ
What receptacles does EMSGLOB supply?
The probe receptacles range has 44 series with 96 catalogue part numbers, covering pitches of 0.5 – 6.5 mm. Each series has its own page with the full specification table and part number list.
What are receptacles used for?
Typical uses: holding replaceable test probes in ICT/FCT fixtures; quick probe exchange without desoldering; crimp, solder or wire-wrap wiring of fixtures.
How do I choose the right receptacle?
Start from the pitch and the space available in your fixture, then check travel, spring force and the current the contact must carry, and pick a tip style that suits the test point. The series pages list these values for every part number; the EMSGLOB team can help you shortlist parts.
Can I get a quotation or samples?
Yes. Send the part numbers and quantities to sales@emsglob.com, call +91-7383235369 or use the enquiry form on the contact page.
Other product categories
- ICT/FCT Spring Test Probes
- Fine Pitch Test Probes
- High-Current Contact Probes
- Kelvin (4-Wire) Test Probes
- Battery & Charging Contacts
- Pogo Pin Connectors
- RF (Radio Frequency) Test Probes
- Switch Probes
- Step Probes
- Flying Probes
- Rigid Contact Pins
- Test Interface & Fixture Solutions
- Tools, Cleaning & Accessories
- Fixture Cylinders & Locking Devices
- Temperature Sensor Probes
Enquire / Request a quote
Tell us the receptacles you need, the quantity and your pitch, travel and current requirements, and the EMSGLOB team will reply with availability and a quotation. Drawings in STEP, IGES, PDF, DWG, DXF or ZIP are welcome.