Product category
Rigid Contact Pins
Rigid contacts have no spring. They are used where the contact needs maximum mechanical stability and a constant conductive path, for example as fixed pins in fixtures and interfaces.
The EMSGLOB range below lists 23 series with 23 part numbers. Open a series to see its full specification table, drawings and every part number, then send us the parts you need for a quotation.
Range at a glance
| Series / families | 23 |
|---|---|
| Catalogue part numbers | 23 |
| Pitch range | 1.1 – 4.5 mm |
| Total length range | 2.85 – 33 mm |
| Rated current range | 1.5 – 10 A |
Applications
- Fixed contacts in test fixtures and interfaces
- Applications that need maximum mechanical stability
- Stationary connections with constant conductivity
All rigid contacts series
FK-011
Rigid contact
Pitch 2.10 mm · L 17.85 mm
FK-026
Rigid contact
Pitch 2.4 mm · 3 A
FK-027
Rigid contact
Pitch 2.4 mm · 3 A
FK-027-E12
Rigid contact
Pitch 2.35 mm · 3 A
FK-069
Rigid contact
Pitch 2.10 mm · 1.5 A
FK-069-80
Rigid contact
Pitch 2.10 mm · 1.5 A
FK-070
Rigid contact
Pitch 2.10 mm · 6 A
FK-090
Rigid contact
Pitch 4.4 mm · 8 A
FK-374
Rigid contact
Pitch 2.10 mm · 3 A
FK-386
Rigid contact
Pitch 4.20 mm · L 22 mm
FK-458
Rigid contact
Pitch 1.10 mm · L 2.85 mm
FK-465
Rigid contact
Pitch 2.4 mm · 3 A
FK-500
Rigid contact
Pitch 4.20 mm · 3 A
FK-502
Rigid contact
Pitch 4.0 mm · 8 A
FK-507
Rigid contact
Pitch 4.40 mm · 8 A
FK-521
Rigid contact
Pitch 4.20 mm · 8 A
FK-526
Rigid contact
Pitch 2.20 mm · 8 A
FK-535
Rigid contact
Pitch 3.2 mm · 10 A
FK-596
Rigid contact
Pitch 3.20 mm · 8 A
FK-627
Rigid contact
Pitch 2.0 mm · 8 A
FK-650
Rigid contact
Pitch 4.2 mm · 5 A
FK-726
Rigid contact
Pitch 2 mm · 8 A
FK-745
Rigid contact
Pitch 4.50 mm · 10 AFAQ
What rigid contacts does EMSGLOB supply?
The rigid contact pins range has 23 series with 23 catalogue part numbers, covering pitches of 1.1 – 4.5 mm. Each series has its own page with the full specification table and part number list.
What are rigid contacts used for?
Typical uses: fixed contacts in test fixtures and interfaces; applications that need maximum mechanical stability; stationary connections with constant conductivity.
How do I choose the right rigid contact?
Start from the pitch and the space available in your fixture, then check travel, spring force and the current the contact must carry, and pick a tip style that suits the test point. The series pages list these values for every part number; the EMSGLOB team can help you shortlist parts.
Can I get a quotation or samples?
Yes. Send the part numbers and quantities to sales@emsglob.com, call +91-7383235369 or use the enquiry form on the contact page.
Other product categories
- ICT/FCT Spring Test Probes
- Fine Pitch Test Probes
- High-Current Contact Probes
- Kelvin (4-Wire) Test Probes
- Battery & Charging Contacts
- Pogo Pin Connectors
- RF (Radio Frequency) Test Probes
- Switch Probes
- Step Probes
- Flying Probes
- Probe Receptacles
- Test Interface & Fixture Solutions
- Tools, Cleaning & Accessories
- Fixture Cylinders & Locking Devices
- Temperature Sensor Probes
Enquire / Request a quote
Tell us the rigid contacts you need, the quantity and your pitch, travel and current requirements, and the EMSGLOB team will reply with availability and a quotation. Drawings in STEP, IGES, PDF, DWG, DXF or ZIP are welcome.